Showing posts with label Die namics. Show all posts
Showing posts with label Die namics. Show all posts

Tuesday, 18 February 2020

Who can resist a donkey!!!...

Hello friends,

I'm trying to catch up with all my blog posts so here is card I made a while ago for a lovely friend of mine.
I have a real soft spot for donkeys! <3 (Be honest - who does n't)???

This card is made with the gorgeous 

I used my favourite card for pencils - Bockingford Hot Pressed, coloured this cutie with Faber Castell Polychromos and cut him/her (?) out! (:

To create the background I cut a 10cm x 13cm rectangle of Bockingford card and blended Distress Oxide Inks in Scattered Straw and Worn Lipstick over it.  I also splattered it with water and Perfect Pearls to create texture. 

I then used the largest Fishtail die to cut a piece another piece of Bockingford and fixed it to the background.

I cut out a fishtail banner die... (Your Next Stamp - discontinued - but any small die would do, you could adapt this bit)!... and stamped the sentiment from
Stamping Bella Mail Chick
in black ink onto it.  I fixed the sentiment to the card design as shown, along with the donkey!
Be sure to have a look around our
to see the gorgeous DT creations there and then to 
to engage in some essential retail therapy!


Thank you for popping by!
Happy crafting
from Sue...xxx

Friday, 27 December 2019

Happy Chanukah...

Hello friends,

I hope you have all had a restful and merry holiday time!

I made this card for some lovely friends of mine, it gave me such joy to make this and send it to them!
I learned quite a lot about Chanukah in the making of this card too which was great!

Ingredients From
Be sure to have a look around our
to see the gorgeous DT creations there and then to 

to engage in some essential retail therapy!
There is free shipping on all orders between now and midnight on 2nd January! 

Thank you for popping by!
Happy crafting
from Sue...xxx



Thursday, 22 November 2018

Cool Christmas...

Hello Friends!

Well, I don't now about you but I have given up pretending that I'm not fussed with Christmas because truth is I am having such a lovely time making Christmas cards! /-:

In fact I'm having such a fab time that today I have made two!
Ingredients from Dies To Die For
*(Currently out of stock but there are lots of other gorgeous Christmas papers you could use)
To make this card I stamped and masked the image and first created the background with Distress Oxides
Chipped Sapphire, Peacock Feathers, Cracked Pistachio 
The image is coloured with Copics and Polychromos
Car - BV23, BV20, Dark Indigo and Black
Snowmen - Cold Grey iv
Hats and scarves are a selection of reds, greens, purples
The snow is a white Signo Uniball Gel Pen
This tag/card is coloured with Polychromos - I didn't note the colours but it is a simple selection of reds, greens, purples
The snow is a  white Signo Uniball Gel Pen
Finally I added a red velvet bow with silver bells - pure Christmas indulgence! (:


Be sure to have a look around our 
to see the gorgeous DT creations there and pop to then to 
to engage in some essential retail therapy!

Thank you for popping by,
Happy creating! 

love from
Sue...xxx


Thursday, 10 May 2018

Unicorn Background!...

Hello Friends,

Happy Thursday!

It's Sue here today with a really fun tutorial involving Copic refills and shaving foam and some gorgeousness from 
Dies To Die For!

I have seen marbling tutorials before but they have always been with different colouring mediums so I thought I would see what happened when I tried it with Copics!

I got really excited when the technique worked and my card ended up with a beautiful marbled pattern!  (My craft room smelt lovely too for a while from the shaving foam)!

The items I used for this marbling technique are
a foil tray, a can of inexpensive shaving foam, glossy photo paper, Copic refills B34, BG13 and V15, a wooden skewer, a plastic ruler, baby wipes.
I sprayed the foam generously onto the foil tray...
then I added drops of Copic refills...
  B34     
BG13  
V15
Then I used a skewer to swirl the ink around in the shaving foam...
until it looked something like this.
The next steps are the exciting part!
I press the card down, glossy side down, into the foam, press quite hard until the foam squeezed out of the side of the card.
then I held the card by the corner and rotated it 360 degrees across the top of the foam.

Still holding onto the corner, I lifted the card off the foam.
I used a ruler to scrape the excess foam off the card
After a few minutes I wiped the card with a baby wipe.

You don't need to throw the foam away, you can add some more ink and repeat the technique several times until the foam has all gone.

This background made me think of unicorns, so, here is the card I made with it.
Ingredients used from
Dies To Die For
Stamps - Stamping Bella - Set of Unicorns
Dies - Stamping Bella - Set of Unicorns Cut It Out Die
My Favorite Things - Die namics - Stitched Circle Frames
Embellishments - *New* Your Next Stamp - Watermelon Party Sparkly Gumdrops
Other - My Favorite Things - Hybrid Ink Pad in Cement Grey

Other Ingredients
Make It Colour Blending Card by Elaine Hughes - Marker Geek
Glitter Card by Crafter's Companion
Copic Markers
Manes - V17, V15, V12, RV55, RV63, RV52
Wings - B66, B34, B21
Horns - All of the above plus BG57, BG11, BG10
Unicorn bodies - W2, W1, W0, W00

Thank you for popping by,
Happy creating! 
love from

Sue...xxx

Don't forget to pop straight to the Dies To Die For inspiration blog to look at the lovely DT creations there, and then straight to Dies To Die For for some essential retail therapy!

                                                                                        


Saturday, 14 April 2018

Miss You...

Happy Saturday everyone!

The sentiment on this card is quite fitting today because I do miss you!  
I have been away from the blog for a couple of weeks - flu thing - *rolls eyes*

I am back today to show you some 
gorgeousness in the way of a beautiful DoveArt new release image
Fantail Goldfish
and a brand new stencil
*NEW Sprinkles Stencil
I love this little fish - I thought the sentiment suited him/her perfectly with the downturned mouth and tail!
Ingredients from 
Stamps - Fantail Goldfish
(UK Peeps you can buy from Dies To Die For)
Other Ingredients
Make It Colour Blending Card by Elaine Hughes (Marker Geek)
MFT Extreme Black Hybrid Ink Pad 
Copic Markers
Clear Copic Glitter Pen
Distress Oxides in Salty Ocean and Peacock Feathers
MFT Die namics Stitched Circle Frames
Archival Ink in Cobalt Blue (Sentiment)
Glossy Accents

Copics - 
Background - B00 and Colourless Blender
Fish - YR09, YR04. Y19, Y15, E81, T5, Copic Clear Glitter Pen

Be sure to pop to 
Whimsy Stamps Blog 
to see the gorgeous DT creations there and then to 
Whimsy Stamps 
to engage in some essential retail therapy!

Thank you for popping by,
happy creating, love from
Sue...xxx




Thursday, 15 March 2018

Clever Owl...

Happy Thursday everyone!

I have something a bit different to show you today.
This card is one of a set I made with some lovely 
goodies
last year for Making Cards Magazine.

I stamped a gorgeous background stamp, heat embossed it and then painted it with distress inks; then that done, I die cut the painted panel to create the owl design.
Ingredients from Dies To Die For

Other Ingredients
White card
Watercolour Card (I use Canson Hot Pressed)
Clear Embossing Stamp Pad by Emboss
Frantage Aged Gold Embossing Enamel for Stampendous
Seedless Preserves, Cracked Pistachio, Wilted Violet, Chipped Sapphire Distress Markers by Tim Holtz
Water brush
Frayed Burlap Distress ink pad
Onyx Black Versafine ink pad
Gold Pearlescent Card
White Hammer Card

Thank you for popping by.
Happy Creating

love from Sue...xxx

Don't forget to pop straight to the Dies To Die For inspiration blog to look at the lovely DT creations there, and then straight to Dies To Die For for some essential retail therapy!